Apply Even Pressure:

     Once the RAM module is fully inserted into the slot, apply equal and

gentle pressure with your fingers on both ends of the module.

     Continue pressing until you hear or feel a click, indicating that the

retention clips have snapped back into place.

     Repeat for Additional Modules:

     If you have multiple RAM modules, repeat the above steps for each

additional module.

     Install the modules in the appropriate slots based on your

motherboard's configuration. Refer to the motherboard manual for specific

guidance if necessary.

     Verify Secure Installation:

     Ensure that the retention clips are fully engaged and holding the RAM

modules securely in place.

     Gently try wiggling the modules to confirm they are seated properly.

They should not move or come loose.

     Close the Retention Clips:

     Once all RAM modules are installed, push the retention clips back into

their original position.

     The clips should snap into place and hold the RAM modules firmly.